2x100W @ 8 ohm / 200W (70/100V Line). 3 LINE. Bluetooth. RJ45 (RS485 commands)
82MEG210
PA 200 MX is an installation amplifier which incorporates 3 LINE inputs (INPUT 1 with BLUETOOTH function) with selector and its own volume control, two tone controls and LEDs which mark the signal presence and limit mode. Additionally, the amplifier incorporates microphone input, providing a mixing function and adding several features which set the system according to the installation requirements.
The functions that can be set are:
- MIC priority
- Mono/stereo input mode
- 3 gain levels in MIC input
- 3 anti-feedback presets in MIC input
PA 200 MX can operate with low impedance or 70/100V line loudspeakers.
The operating mode is selected through a switch in the rear side and a dipswitch block which has some terminals reserved for future improvements.
In the rear side is allocated a RJ45 connector which admit RS485 commands from an external device in order to control some features.
| Output power | 2x100W @ 8 ohm / 200W (70/100V Line) |
| Audio inputs | 2 LINE (unbalanced), 1 MIC, 1 RJ45 (RS485 commands) |
| THD + N | 1 kHz, 15W, 8 Ohm/16 Ohm <= 0.1%
1 kHz, 30W, 70V/100V <= 0.2% |
| Frequency response | 20 Hz - 20 kHz 0dB - 0.5dB |
| Main Supply AC power | 100-240 V - 50/60Hz |
| Dimensions (WxHxD) | 215x48x264 mm |
| Weight | 2.3 Kg |