Linearray lyftare WORK WTS506 Svart

St:

Artikelnummer:70WTS506

Enhet:st.

Lagerstatus:I lager (lev. ca. 4-8 vardagar)

Load: 510 kg. Height: 6.08 m.

70WTS506

The WTS /DY Series means a change of concept within the front load towers, as it introduces the new Structural Mode. This Structural Mode does not use the winch to lift the load, but involves lifting the load with the help of a manual or electric hoist. That is, the tower is used as a structure that is all locked to the required working height. Once the tower is raised to this desired height, the load must be raised with the hoist. The Structural Mode performs improved loading capactities.

Furthermore, the WTS /DY Series incorporates the innovative Dynamic Overlap system and the Dynsys system (only available on the WTS-DY Series).

Dynamic Overlap is an innovative solution that increases the resistance of the towers and reduces their deflection, making that each tower section overlaps with the previous one at different distances, as with trees in nature. This means that all efforts are concentrated in the same way in all the sections of the tower. Thanks to this, the tower can withstand greater efforts with less deflection. Dynamic Overlap is available on WTS and WTS-DY series.

Dynsys system is an optional solution designed to guarantee the ?health? and good operation of the tower, since it accomplishes many functions, all focused on maximizing user safety. Each Dynsys system is adjusted to control the torque that is applied on the winch and, when this is exceded (for ex. due to an excess of load, problem of friction of some piece in bad condition, etc) the system acts and does not allow to continue the lifting process. The excess of force in the tower is regulated so that the user does not have to apply a force greater than 150N. Dynsys has been designed to comply with the DIN 56950 standard. Dynsys is available on WTS-DY Series.

BeskrivningRelaterade produkter

Modes of operation: Mechanism Mode and Structural Mode.
Four extensible profiles made of extruded aluminium.
Reinforcing bars on the back and front of the lifter for additional reinforcement.
Castors at the base of the lifter.
Dynamic Overlap system.
Available colour: Black.
Compatible accessories: AWS 402, AWS 302, AWS 401.

WTS Model	WTS 506
Folded height	1,93	m
Folded height	6,33	ft
Base width	0,58	m
Base width	1,90	ft
Base length	0,52	m
Base length	1,71	ft
Maximum height	6,08	m
Maximum height	19,95	ft
Minimum fork height	0,70	m
Minimum fork height	2,29	ft
Unfolded diameter	2,71	m
Unfolded diameter	8,89	ft
Frontal side width	2,11	m
	6,92	ft
Rear side width	1,55	m
Rear side width	5,09	ft
Fork length	0,61	m
Fork length	2,00	ft
Number of profiles	4
Minimum load capacity	25	Kg
Minimum load capacity	55,12	Lb
Max.load as mechanism	510	Kg
Max.load as mechanism	1124,36	Lb
Max. load as structure	510	Kg
Max. load as structure	1124,36	Lb
Net weight	150	Kg
Net weight	330,7	Lb
Winch	900	Kg
Winch	1984,2	Lb
Cable diameter	6	mm²
Noise emissions	71	dB